3/31/2023 0 Comments Logger pro thermometerYou can set it to stop manually, when the logger is full, after a set number of readings or at a specific time and date. You can program your logger to stop recording in several ways through the logger settings when you set up the device. To stop the screen from toggling, hold the display/lock button down for five seconds. To turn the volume on or off, hold the mute button for five seconds. The display will show the last recorded temperature, minimum and maximum temperatures, the high and low alarms for each sensor, and the volume and battery levels. Press the display button to toggle between viewing sensors 1 and 2 and sensors 3 and 4. On the display you will be able to view two sensors at one time. You can then unplug the device from the computer. If the instrument is showing “Strt At XXhr XX”, it will automatically begin logging at the time that you have set it to commence from. It will begin to log immediately or after a time delay if you set one. If the logger is displaying “Pres to Strt”, you can either press the start/stop button on the instrument to enable it to begin logging, or you can select the start button in the bottom right-hand corner of the Logger Settings window in ThermaData Studio. Once you have confirmed that you would like your new settings to be sent to the device, the instrument will either display “Pres to Strt” or “Strt At XXhr XX”. A pop-up window will remind you that all data from the device will be cleared if you continue. This will send your new settings to the device, erasing any existing data from the instrument in the process. Once you have inputted your settings and you are ready for the logger to begin, click ‘Send Settings’ at the bottom of the Logger Settings window. Setting a time delay is useful for applications where the logger may need to acclimatise before starting. You can program your logger to start immediately, after a set time delay or at a specific time and date. Ensure you have inserted your probes before starting a log. The ports are numbered so you can see which probe corresponds to which sensor number on the device. The top of the device has four ports for each of your probes. From here you can rename your sensors and set high and low limits for each, select your reading intervals, enable multiple logs and sound alarms and select when you want your logger to start and finish taking temperatures. Click on ‘Instrument Settings’ to configure your instrument. Select the ThermaData tab at the top of the page. A pop-up should appear in the bottom right-hand corner to let you know that your instrument has been installed. Once you have done that, plug your logger into the computer using the USB cable provided and open the software. The first thing you will need to do, if you haven’t already, is to download and install the latest version of ThermaData Studio software (v6.0.0.0). Read on to learn how to do this, plus how to download and view your data. Return the logger to above -20☌ before handling.So you’ve just bought a ThermaData 4 Channel Logger? Now it’s time to set up your instrument and start logging your temperatures. If the logger is deployed in a location where the temperature drops below -20☌, make sure the logger remains stationary and is not pulled on or struck. † IMPORTANT: The plastic case will become brittle at temperatures lower than -20☌. The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). NIST certificate Available: for additional charge Offload modes: Offload while logging stop and offloadīattery indication: Battery voltage can be viewed in status screen and optionally logged in datafile. Launch modes: Immediate start and delayed start Logging interval: Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations logging intervals from 1 second to 18 hours. Wetted materials: Polypropylene case, EPDM® o-rings, stainless steel retaining ringīuoyancy (fresh water): +13 g (0.5 oz.) in fresh water at 25☌ (77☏) +17 g (0.6 oz.) with optional boot 42,000 12-bit temperature measurements)ĭimensions: 3.0 cm (1.19 in.) maximum diameter, 11.4 cm (4.5 in.) length mounting hole 6.3 mm (0.25 inches) diameter Memory (non-volatile): 64K bytes memory (approx. Real-time clock: ± 1 minute per month 0° to 50☌ (32° to 122☏)īattery: 2/3 AA, 3.6 Volt Lithium, factory-replaceable ONLYīattery life (typical use): 6 years with 1 minute or greater logging interval Response time: (90%) 5 minutes in water 12 minutes in air moving 2 m/sec (typical)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |